Cisco-Meraki-Pride-Logo kopia

Multigigabit 802.3at PoE Injector

802-poe-injector-1
Multigigabit 802.3at PoE Injector EU

(MA-INJ-5-EU)

 

The Cisco Meraki Multigigabit PoE Injector allows delivery of both data and power to a Meraki access point over a single Ethernet cable, allowing deployment of devices exactly where they are needed to provide the best wireless coverage and at much lower installation cost.

REGULAR RETAIL PRICE:
£331.14
excl. VAT
OUR PRICE:
£234.75
excl. VAT
Technical Specifications

COMPATIBLE WITH
MR53
MR53E
MR84


POWER
Input Voltage: 100 to 240 VAC
Input Current: 1.5A maximum
AC Input Frequency: 50-60 Hz
Maximum Output Power: 30 W
Powered device can be up to 100m away from power injector


DATA
Compatible with 10/100/1000Mbps Ethernet and multigigabit ethernet up to 10Gbps, full duplex

ENVIRONMENTAL 
Operating Temperature: 14 to 113°F (-10 to 45°C)
Storage Temperature: -40 to 158°F (-40 to 70°C)
Operating Humidity: 5 to 90%


ADDITIONAL FEATURES
Short-circuit protection


PHYSICAL DIMENSIONS
6.5” × 3.5” × 1.7” (166 mm × 87.9 mm × 43 mm)
Weight: 0.91 lb (410 g)


MOUNTING
Mounts to walls (anchors and screws not included)

COMPATIBILITY
Complies with 802.3at standard
Backward compatibility with 802.3af MR-series access points
For MR53, MR53E, MR84


LED INDICATORS 
Input Power
Fault
Detect/connected to valid 802.3at load


ORDERING INFORMATION
MA-INJ-5-EU Meraki Multigigabit 802.3at Power over Ethernet Injector (EU plug)

EASY INSTALLATION 

Use Power Over Ethernet to supply power (and optionally data) to Cisco Meraki 802.3at compatible devices. Ethernet cable is inexpensive and easy to install. Simply plug the AC adapter into the side of the Cisco Meraki PoE injector, then plug ethernet cable into the PoE port and route that cable to your 802.3at-compatible device. To add a wired data connection, plug the data ethernet cable into the LAN port on the Meraki PoE Injector.