Back to Articles

Static IP Addresses for Business Broadband: A UK Guide to Costs, IPv4 Scarcity and IPv6 Readiness in 2026

Static IP Addresses for Business Broadband: A UK Guide to Costs, IPv4 Scarcity and IPv6 Readiness in 2026

A static IP address for business broadband is one of those line items that sits quietly on a connectivity quote, costs a few pounds a month, and then turns out to matter enormously the day a firewall rule, a supplier’s allow-list or a remote-access VPN stops working because the address changed overnight. For many UK small and mid-sized businesses it is the difference between a connection that simply browses the web and one that can reliably host services, accept inbound connections and prove its identity to partners.

This guide explains what a static (fixed) IP address actually is, when your business genuinely needs one and when it does not, what UK providers typically charge for a single address or a /29 block, how the global shortage of IPv4 addresses is pushing prices up, and how to plan sensibly for IPv6 so you are not caught out when a supplier, cloud platform or regulator expects it. You will also find a readiness checklist, the mistakes we see most often during office moves and ISP switches, and a short anonymised case study from a multi-site professional services firm.

What is a static IP address? Definition and context

Every device that talks across the internet needs a public IP address so that traffic can find its way back. On most consumer and many entry-level business broadband packages, your router receives a dynamic public address from the provider’s pool using DHCP or PPP. That address can change when the router reboots, when the line resyncs after a fault, or simply when the provider re-balances its network. For browsing, email and Microsoft 365 that is irrelevant: outbound connections work regardless of which address you happen to hold.

A static IP address is a public IPv4 (and increasingly IPv6) address that your provider permanently assigns to your connection. It does not change unless you change provider or ask for it to be changed. Providers sell them individually (a “single static IP”, often written as a /32) or in small blocks — most commonly a /29, which is eight addresses of which five are usable once the network address, broadcast address and the provider’s gateway are accounted for. Leased lines frequently include a /29 or /30 as standard; FTTP and SoGEA business broadband usually treats it as a paid add-on.

The reason this matters more in 2026 than it did a decade ago is scarcity. RIPE NCC, the regional internet registry that serves the UK and Europe, allocated its last free block of IPv4 addresses in November 2019. Since then, providers that need more IPv4 space must buy it on the secondary transfer market or recover it from existing customers. That has driven three visible trends: more providers using carrier-grade NAT (CGNAT) on cheaper tiers, so customers share a public address; static IPs moving from “free on request” to a chargeable extra; and a slow but steady push towards IPv6, which has effectively unlimited address space. If you are reviewing your wider connectivity, our network capacity planning guide covers how addressing fits into a broader bandwidth and resilience plan.

Pro Tip

Before buying a static IP, check whether your current connection is behind CGNAT. Log in to the router and compare the WAN address it shows with the address reported by a “what is my IP” site. If the router shows an address in the 100.64.0.0/10 range, or the two do not match, you are sharing a public address — and inbound services such as VPNs and CCTV remote viewing will not work reliably until you move to a dedicated or static address.

Static IP by the numbers — the UK 2026 reality check

Static addressing is a small topic with some surprisingly concrete numbers attached. The figures below are drawn from published RIPE NCC policy, typical UK business broadband and leased line price lists, and the patterns Cloudswitched sees across client connectivity reviews. Treat price ranges as indicative: every provider bundles differently, and the same address can be “free” on one tariff and £10 a month on another.

2019
Year RIPE NCC handed out its last free IPv4 block for Europe and the UK
5
Usable addresses in a standard /29 static IP block
£5–£15
Typical monthly add-on for a single static IPv4 on UK business broadband
~50%
Approximate share of UK traffic to major platforms now carried over IPv6

The headline takeaway is that IPv4 is now a priced, finite resource rather than a free utility. On the transfer market, a single IPv4 address has traded in the region of tens of US dollars over the past few years, and providers pass part of that cost on. Meanwhile IPv6 has quietly become mainstream: the large UK consumer networks have run dual-stack IPv6 for years, mobile networks use it heavily, and the major cloud platforms all support it. The practical question for a business is no longer “IPv4 or IPv6?” but “how many IPv4 addresses do we genuinely need, and is our IPv6 configuration safe and intentional?”

Do you actually need a static IP? Readiness scoring

Not every business needs a fixed address, and buying one “just in case” can create a false sense of security if it is then used to expose services that should sit behind a cloud gateway. The score cards below map common requirements against how strongly they depend on a static IP. A “high” badge means the requirement will be unreliable or impossible without one; “low” means a dynamic address, or a cloud-based alternative, is perfectly adequate.

Strong case for a static IP
Supplier or bank portals that allow-list your office addressHigh need
Site-to-site VPN to a head office or Azure gatewayHigh need
On-premises VoIP PBX or SIP trunk registered by IPHigh need
Conditional Access “trusted location” rules in Microsoft Entra IDHigh need
Hosting an inbound service such as an SFTP serverHigh need
Helpful but has alternatives
Remote access to CCTV or access-control systemsMedium
Remote desktop to office PCs for home workersMedium
Outbound email relay from a scanner or line-of-business appMedium
Monitoring the office connection from an external serviceMedium
Rarely needs a static IP
Microsoft 365, Google Workspace and SaaS appsLow
Cloud-hosted phone systems such as Teams PhoneLow
General web browsing and video callsLow
Cloud backup to Azure or a managed backup serviceLow

If most of your requirements sit in the left-hand card, a static IP is a genuine operational dependency and should be treated as part of the connectivity specification, not an optional extra. If they sit mostly in the middle card, it is worth asking whether a cloud-delivered alternative — a zero-trust remote access service, a vendor’s cloud relay for CCTV, or SMTP authentication through Microsoft 365 — would be more secure than opening a port on a fixed address. And if your estate is fully cloud-based, a dynamic address on a well-chosen broadband service may be entirely sufficient.

Why UK businesses request static IPs — the common drivers

When Cloudswitched reviews connectivity for a new client, the reason a static IP is on the order is usually one of a handful of recurring drivers. The chart below shows the indicative share of static IP requirements we see by primary reason across typical SME connectivity projects. Many sites have more than one reason, so the bars show how often each appears as a stated requirement rather than adding up to 100%.

Site-to-site or cloud VPN
68%
Third-party IP allow-lists
57%
Conditional Access trusted location
44%
CCTV and building systems
39%
On-premises VoIP or SIP trunks
31%
Hosting inbound services
18%
“The last ISP gave us one”
26%

Two points stand out. First, VPNs and allow-lists dominate: a fixed address is most often about identity — letting another system recognise your office — rather than about hosting anything. Second, roughly a quarter of requests have no current technical driver at all; the address was simply carried over from a previous contract. That is worth auditing, because every static IP that is no longer needed is a small recurring cost and, if it still has ports forwarded to it, a potential attack surface.

The Conditional Access driver deserves particular attention. Many organisations use the office IP as a “trusted named location” in Microsoft Entra ID so that staff in the office are prompted for MFA less often. That works well, but it creates a hidden dependency: if the address changes during a broadband upgrade or office move and nobody updates the policy, users suddenly face MFA prompts everywhere, or worse, a policy that blocks sign-in from untrusted locations locks the whole office out. Our office downsizing and consolidation guide covers how to sequence these changes during a move.

Static IP cost breakdown — what UK providers charge

Pricing for static IPs varies widely depending on the type of connection, the provider’s own IPv4 holdings and how aggressively they bundle. The table below shows typical UK ranges in 2026 for the most common options. Always check whether a quoted price is per address or per block, whether there is a one-off set-up fee, and whether the addresses are tied to the line or can be ported to a new circuit at the same premises.

Connection typeTypical static IP offerIndicative monthly costCommon set-up feeNotes
Business FTTP / SoGEA broadbandSingle static IPv4 (/32)£0–£10£0–£25Often included on “pro” tiers; chargeable on entry-level tariffs
Business FTTP / SoGEA broadband/29 block (5 usable)£10–£25£0–£50Some providers require a justification form for larger blocks
Leased line (EFM / Ethernet)/29 or /30 includedUsually includedIncludedLarger blocks (/28) typically £15–£40 extra with RIPE justification
4G / 5G business routerStatic public IPv4 APN£5–£20£0–£30Default mobile data is almost always CGNAT; static APN must be requested
IPv6 allocation/48 or /56 prefixUsually freeNoneOffered by most business ISPs; check it is static rather than delegated dynamically

The monthly cost of a static IP is rarely the deciding factor in choosing a provider, but the terms often are. A few clauses to look for: whether the provider will let you keep the same addresses if you upgrade from FTTC to FTTP or from broadband to a leased line with them; whether addresses are recovered immediately at contract end or held for a grace period; and whether reverse DNS (PTR records) can be set for you, which matters if any system sends email directly from the office. Our guide to choosing a business ISP and contract goes into the wider contract terms in detail.

It is also worth costing the hidden alternative. If a single static IP is needed only so that one supplier portal recognises you, a £6-a-month add-on is clearly cheaper than re-engineering the process. But if the static IP is there to expose a remote desktop server to the internet, the true cost includes the security risk, the monitoring and the patching discipline that exposure demands. In that case a cloud-based remote access service may cost more per month on paper and far less in practice.

The static IP and IPv6 rollout timeline — what a real project looks like

Adding or changing a static IP sounds like a five-minute job. In practice, the address is woven into firewall rules, VPN configurations, DNS records, third-party allow-lists and cloud identity policies. The timeline below reflects a typical change for a 30–80 person office moving to a new provider, including enabling IPv6 properly for the first time.

Week 1 — Dependency audit
Search firewall configs, VPN peers, Entra ID named locations, DNS zones, SPF records and supplier contracts for the current public address. Build a register of every system that depends on it.
Week 1 — Requirement sizing
Decide whether you need a single address or a /29 block, and whether separate addresses are needed for guest Wi-Fi, VoIP or a hosted service. Request an IPv6 prefix at the same time.
Week 2 — Order and allocation
Place the order and obtain the allocated addresses in writing before the install date, so third parties can be notified in advance. Ask for reverse DNS to be set if required.
Weeks 2–4 — Third-party notifications
Send the new address to banks, payment providers, software vendors and partners that allow-list you. Ask them to add the new address alongside the old one rather than replacing it.
Install day — Dual running
Bring the new circuit up alongside the old one where possible. Configure the firewall, VPN peers and DNS, and test each dependency from the register.
Install day — IPv6 enablement
Enable IPv6 on the WAN and LAN with a deliberate firewall policy: allow outbound, deny unsolicited inbound, and mirror the IPv4 rule set for any published services.
Week 5 — Identity and policy update
Update Conditional Access named locations with both IPv4 and IPv6 ranges, then test sign-in from the office and from an untrusted network.
Week 6 — Cutover and clean-up
Move traffic fully to the new circuit, confirm with third parties that old addresses can be removed, and update the network documentation and asset register.

The single biggest time saver is starting the third-party notifications early. Banks and payment processors in particular can take ten working days or more to process an allow-list change, and some insist on the request coming from a named account holder. If the new address is only known on install day, you will either delay the cutover or accept a period where critical portals refuse connections from the office.

Static IP vs dynamic IP with cloud services — how the options compare

For most businesses the real decision is not “static or dynamic” in isolation, but whether to anchor security and connectivity to a fixed office address or to identity and cloud services that work wherever staff happen to be. Both approaches are valid, and many organisations use a blend. The comparison below summarises the trade-offs.

Dynamic IP + cloud-first

No fixed address; identity and cloud services do the work

Monthly cost £0 extra
Works with CGNAT Yes, for outbound
Site-to-site VPN Only with dynamic DNS or cloud SD-WAN
Supplier allow-lists Not supported
Remote access Zero-trust or cloud relay
Resilience to ISP change High — nothing to update
Best fit Fully cloud estates, small teams

Static IP + layered security

Fixed address used for identity, not for exposure

Monthly cost £5–£25 typical
Works with CGNAT No — dedicated address required
Site-to-site VPN Simple and reliable
Supplier allow-lists Fully supported
Remote access VPN or zero-trust; no open RDP
Resilience to ISP change Needs planned migration
Best fit Multi-site, regulated or supplier-integrated firms

The highlighted option reflects what we most often recommend for established UK SMEs: buy a static IP where an external party or a VPN genuinely needs to recognise you, but do not use it as an excuse to publish internal services directly to the internet. Pair it with MFA everywhere, a modern firewall with intrusion prevention, and remote access delivered through a VPN or zero-trust broker. That combination keeps the operational benefits of a fixed address without making it a target.

For organisations running several offices, cloud-managed SD-WAN changes the calculation again. Platforms such as Cisco Meraki can build site-to-site tunnels automatically even when branches sit on dynamic addresses, using a cloud registry to find each peer. In that model, a static IP at head office and dynamic addresses at small branches is often a sensible, cost-efficient mix.

Static IP and IPv6 readiness gauge

Cloudswitched scores connectivity estates against a simple addressing readiness benchmark covering documentation, dependency mapping, IPv6 configuration, exposure and change process. The gauge below shows the typical score for a UK SME at the start of a connectivity review — before any remediation work.

42/100
Typical UK SME addressing and IPv6 readiness at first review

A score around 40 usually means the static IP is known to one person, recorded in an old email from the ISP, and referenced in more places than anyone realises. IPv6 is either disabled entirely or, more worryingly, enabled by default on the router with no deliberate firewall policy. Neither is a crisis on its own, but both create risk during exactly the moments businesses tend to change things: office moves, provider switches and security certification.

Moving from the low 40s to the 75–85 range is rarely about buying anything. It is about writing down the addresses and their dependencies, deciding deliberately how IPv6 should behave, closing any port forwards that no longer have an owner, and adding the public address to your change process so that nobody upgrades a line without checking the register first.

Addressing benchmarks and KPIs

The progress rows below show how often each good-practice control is in place across typical UK SME estates at first review. They are a useful way to prioritise: the lowest bars are generally the cheapest and quickest wins.

Share of UK SMEs with each addressing control in place at first review

Public IP recorded in IT documentation
58%
Register of third parties that allow-list the IP
21%
No unmanaged port forwards on the router
47%
RDP not exposed directly to the internet
81%
IPv6 deliberately configured (on or off)
29%
IPv6 firewall rules mirror IPv4 policy
24%
Conditional Access locations include IPv6
17%
Reverse DNS set where mail is sent directly
52%
Public IP changes included in change process
33%

The weakest areas are consistently the third-party register and IPv6. The register is weak because allow-list requests are usually handled by whoever needed access at the time — finance for the bank, operations for a logistics portal — rather than by IT. IPv6 is weak because it often “just works” silently: modern routers, Windows and macOS will all prefer IPv6 when it is available, so traffic can be leaving the office on an address nobody has thought about.

That last point has a direct security implication. If your Conditional Access trusted location contains only the office IPv4 address, but staff devices reach Microsoft 365 over IPv6, the policy will treat office sign-ins as untrusted. Depending on how the policy is written, that either causes needless MFA prompts or, if someone has “fixed” it by loosening the rule, quietly weakens your security. Including the office IPv6 prefix in named locations is a small change with a meaningful effect.

How quickly is IPv6 arriving for UK businesses?

IPv6 adoption in the UK has moved from a niche concern to the default for large parts of the internet. The major consumer broadband networks and the mobile operators carry a substantial share of their traffic over IPv6, and the large platforms — Microsoft, Google, Meta, Cloudflare and the main CDNs — all serve content natively over it. Business-grade connections lag behind consumer ones, largely because firewalls and legacy line-of-business systems were configured for IPv4 only, but the gap is closing as providers include a prefix by default.

50%
Approximate share of UK users reaching major platforms over IPv6

For a business, the practical consequence is twofold. First, IPv6 is not something you can indefinitely ignore: when you buy a new FTTP line or 5G router, it may well arrive with IPv6 enabled, and the router’s default behaviour will decide your security posture unless you decide it first. Second, IPv6 removes the scarcity that makes IPv4 static addresses valuable. A typical business IPv6 allocation is a /48 or /56 prefix — enough for thousands or millions of subnets — and it is normally static and free. Over time that will make “static IP” a much less meaningful upsell, but only once every supplier and partner you integrate with can accept IPv6 as well.

Until then, dual-stack — running IPv4 and IPv6 side by side — is the sensible norm. Keep your small, priced IPv4 allocation for allow-lists and legacy integrations, and adopt IPv6 deliberately for everything else, with firewall policy, monitoring and documentation that treat both protocols equally.

Real-world example — a multi-site firm’s static IP migration

A Leeds-headquartered accountancy practice with 62 staff across three offices engaged Cloudswitched ahead of a planned move from FTTC broadband to a leased line at head office and FTTP at its two smaller sites in Harrogate and York. The original brief was simply “keep the same static IP”. The existing provider could not port the address to the new circuit, so the practice needed a new /29 at head office and had to decide what to do at the branches.

The dependency audit took two days and turned up more than anyone expected. The head office address was allow-listed by two banks, an HMRC-recognised practice management platform, a payroll bureau and the building’s access-control supplier. It was also used as a Conditional Access trusted location and as the peer address for two IPsec VPN tunnels to the branches. Separately, the old router still had a port forward to a decommissioned remote desktop server, and IPv6 had been enabled on one branch router by default with no inbound filtering.

The new design gave head office a /29 on the leased line, with one address dedicated to the firewall’s outbound NAT and another reserved for a future hosted service. The branches moved to FTTP with dynamic addressing and joined head office over cloud-managed SD-WAN, which removed their need for static IPs entirely. Third parties received the new head office address three weeks before cutover and were asked to add rather than replace. On cutover day, every item on the register was tested from the office before the old line was ceased, and IPv6 was enabled on all three sites with a mirrored firewall policy and the new prefixes added to Conditional Access.

“We thought we were changing a broadband line. It turned out we were changing the way six outside organisations recognised us. Having the list in front of us before the engineer arrived is the only reason the move was a non-event for our clients.” — Practice Manager, Yorkshire accountancy firm

The branch static IP charges were dropped, the forgotten remote desktop exposure was closed, and the practice now has a one-page addressing register that sits alongside its Cyber Essentials evidence. Closing unmanaged inbound exposure is directly relevant to certification — see our Cyber Essentials guide to unsupported software and end-of-life risks for the related controls on firewalls and boundary devices.

Common static IP and IPv6 mistakes to avoid

Most addressing problems are not technical failures; they are planning gaps that surface at the worst possible moment. These are the mistakes we see most often when picking up an estate from another provider or helping a business through an office move.

  • Assuming the static IP will move with you. Addresses usually belong to the provider and the specific circuit. Changing provider, technology (FTTC to FTTP, broadband to leased line) or even exchange can mean new addresses. Confirm in writing before signing.
  • Not knowing who allow-lists you. If there is no register, the first sign of a change is a payment run that fails or a supplier portal that refuses to load. Build the register before you need it.
  • Using the static IP to publish internal services. Remote desktop, NAS management pages and older VPN appliances exposed on a fixed address are actively scanned within minutes. Use a VPN or zero-trust access instead, and keep boundary devices patched.
  • Leaving IPv6 on its router defaults. Some consumer-grade and older business routers enable IPv6 with permissive inbound rules. Either configure it deliberately with a firewall policy matching IPv4, or disable it intentionally and document the decision.
  • Forgetting IPv6 in Conditional Access. Devices prefer IPv6 when available, so a trusted location that lists only the IPv4 address no longer recognises the office.
  • Buying a /29 when one address will do. Larger blocks cost more and often require a RIPE justification. Size the allocation to real requirements, with one spare for growth.
  • Ignoring CGNAT on backup connections. A 4G or 5G failover line almost always uses CGNAT by default, so VPNs and allow-listed services fail over to an address nobody recognises. Order a static APN or design failover around it.
  • Ceasing the old line before testing. Without dual running, there is no fallback if a forgotten dependency breaks. Keep the old circuit live until every item on the register is tested.
Watch out

The failover mistake catches many businesses out. If your primary leased line fails and traffic moves to a 4G backup on a shared CGNAT address, every system that relies on your static IP — bank portals, VPN tunnels, Conditional Access — will treat you as a stranger at exactly the moment you are already under pressure. Test failover against the dependency register, not just against “can we browse the web”. Our broadband failover and redundancy guide explains the design options.

Static IP and IPv6 checklist — the 12-point essentials

Use this checklist whenever you order a new connection, change provider, move office or prepare for a Cyber Essentials assessment. It is deliberately short enough to run in an afternoon.

  1. Confirm whether each site’s connection is on a dedicated public address or behind CGNAT.
  2. Record every public IPv4 address and IPv6 prefix, per site and per circuit, in your network documentation.
  3. Build a register of every third party, cloud service and internal policy that references those addresses.
  4. Decide, per site, whether a static IP is a genuine requirement or a carry-over that can be dropped.
  5. Size the allocation — single address or /29 — to actual needs, with one spare for growth.
  6. Check contract terms for address portability on upgrades and the grace period at contract end.
  7. Close any port forwards without a named owner and a documented business reason.
  8. Ensure no remote desktop, NAS admin page or unpatched VPN appliance is exposed directly to the internet.
  9. Configure IPv6 deliberately: enabled with a firewall policy mirroring IPv4, or disabled with the decision documented.
  10. Add office IPv6 prefixes alongside IPv4 addresses in Microsoft Entra ID named locations and other allow-lists.
  11. Order a static APN, or design around CGNAT, for any 4G or 5G failover connection.
  12. Add “public address change” as a trigger in your change process, with the register as a mandatory check.
Note

Cyber Essentials requires that boundary firewalls block unauthenticated inbound connections by default and that any permitted inbound rule is approved and documented with a business need. A clear addressing register and a reviewed list of port forwards make that evidence straightforward to produce — and they apply equally to IPv6 if it is enabled.

Static IP at a glance — key facts summary

TopicKey fact
What it isA public IP address permanently assigned to your connection by the provider
Typical block sizesSingle address (/32) or /29 with five usable addresses
Typical broadband cost£0–£10 a month for one address; £10–£25 for a /29
Leased linesUsually include a /29 or /30 as standard
IPv4 scarcityRIPE NCC free pool exhausted in November 2019; addresses now traded
CGNATShared public address used on cheaper tiers and most mobile data; blocks inbound services
IPv6 allocationTypically a static /48 or /56 prefix, usually free
IPv6 adoptionRoughly half of UK traffic to major platforms; dual-stack is the norm
Main reasons to buyVPNs, supplier allow-lists, Conditional Access, on-premises VoIP
Main riskUsing the fixed address to expose internal services directly
PortabilityAddresses usually stay with the provider and circuit, not the customer
Failover gotcha4G/5G backup lines use CGNAT unless a static APN is ordered
Change lead timeAllow two to three weeks for bank and supplier allow-list updates

How Cloudswitched handles static IPs and IPv6

Cloudswitched treats public addressing as part of the connectivity design rather than a tick-box on an order form. That means auditing what depends on your current addresses, specifying the right allocation for each site, coordinating third-party allow-list changes ahead of install day, configuring IPv6 deliberately on your firewalls, and leaving you with a documented register that survives the next provider change or office move.

Planning a new line or switching provider?

Our connectivity team can audit your current addressing, size static IP and IPv6 requirements, and manage the cutover so suppliers, VPNs and security policies keep working.

Talk to us about Business Connectivity

Frequently Asked Questions

Does my business really need a static IP address?

Only if something depends on recognising your office address. The common cases are site-to-site VPNs, supplier or bank portals that allow-list your IP, Microsoft Entra ID Conditional Access trusted locations, on-premises phone systems with IP-registered SIP trunks, and any inbound service you host yourself. If your estate is fully cloud-based — Microsoft 365, cloud telephony, SaaS line-of-business apps — a dynamic address on a good business broadband line is usually perfectly adequate, and you can avoid the extra monthly charge and the temptation to expose services directly.

How much does a static IP cost in the UK?

On business FTTP or SoGEA broadband a single static IPv4 address typically costs between nothing and around £10 a month, with some providers charging a small one-off set-up fee. A /29 block with five usable addresses is commonly £10–£25 a month. Leased lines usually include a /29 or /30 in the price. Static addresses on 4G or 5G business routers require a static APN and typically cost £5–£20 a month. Prices have generally risen since the European IPv4 pool ran out in 2019.

Can I keep my static IP if I change broadband provider?

Usually not. Static IPv4 addresses belong to the provider’s allocation and are tied to their network, so switching provider almost always means new addresses. Even staying with the same provider, upgrading from FTTC to FTTP or from broadband to a leased line can change the address. The only common exception is a business that holds its own provider-independent address space and announces it via BGP, which is uncommon for SMEs. Plan for a change and start notifying third parties early.

What is CGNAT and why does it matter?

Carrier-grade NAT lets a provider share one public IPv4 address between many customers. It is common on cheaper broadband tiers and almost universal on mobile data. Outbound browsing and cloud apps work normally, but anything that needs to reach your office from the internet — a VPN, remote CCTV viewing, a hosted service — will not work reliably, and allow-lists cannot identify you because other customers share the same address. If your router’s WAN address is in the 100.64.0.0/10 range, you are behind CGNAT.

Is a static IP a security risk?

The address itself is not a risk, but what you expose on it can be. Attackers continuously scan the whole IPv4 internet, so a fixed address with an open remote desktop port or an unpatched VPN appliance will be found quickly. Used purely for outbound identity — VPN peering and allow-lists — with inbound connections blocked by default, a static IP adds very little risk. Keep boundary devices patched, enforce MFA and review port forwards regularly.

Should my business enable IPv6?

For most businesses, yes — deliberately. Much of the internet now runs over IPv6, the major cloud platforms support it natively, and new lines increasingly arrive with it enabled. The key is to configure it intentionally: a firewall policy that allows outbound and blocks unsolicited inbound traffic, equivalent rules for any published services, monitoring that covers both protocols, and Conditional Access locations that include your IPv6 prefix. If a legacy system cannot cope, disabling IPv6 temporarily is acceptable, provided the decision is documented and revisited.

What is a /29 block and how many addresses do I get?

A /29 is a block of eight consecutive IPv4 addresses. One is the network address, one is the broadcast address and one is normally used by the provider’s gateway, leaving five usable addresses for your equipment. Businesses use the extras to separate outbound traffic for different purposes, to host a service on its own address, or to give guest Wi-Fi a different public identity from staff traffic. If you only need one address for VPNs and allow-lists, a single static IP is usually sufficient.

Do I need a static IP for Microsoft 365 or Teams Phone?

No. Microsoft 365, Teams and Teams Phone are designed to work from any internet connection, including dynamic and CGNAT addresses. A static IP becomes useful only if you want to use the office address as a trusted named location in Conditional Access policies, or if you run a direct-routing session border controller on site. Even then, remember to add the office IPv6 prefix as well as the IPv4 address, otherwise sign-ins that travel over IPv6 will not be recognised as coming from the office.

How does a static IP affect 4G or 5G backup connections?

Mobile data connections almost always sit behind CGNAT by default, so when your primary line fails and traffic moves to a 4G or 5G router, your public address changes to a shared one. VPN tunnels, bank allow-lists and trusted-location policies can all fail at that point. Options include ordering a static APN from the mobile provider, using cloud-managed SD-WAN that can rebuild tunnels from dynamic addresses, and asking suppliers to allow-list the backup address too.

How long does it take to change a static IP safely?

The technical change takes minutes, but a safe migration typically takes three to six weeks end to end. Most of that time is the dependency audit and the third-party notifications: banks, payment providers and some software vendors can take ten working days or more to update allow-lists. Running the old and new circuits in parallel for a short period, and testing every item on your dependency register before ceasing the old line, is the most reliable way to avoid disruption.

Get your business connectivity specified properly

From single-site FTTP to multi-site leased lines with SD-WAN, Cloudswitched designs connectivity around what your business actually depends on — including the addresses everyone forgets until they change.

Explore Cloudswitched Connectivity
Tags:Internet & Connectivity
Cloudswitched

London-based managed IT services provider offering support, cloud solutions and cybersecurity for SMEs.

Cloudswitched Service

Business Broadband & Connectivity

Fibre, leased lines and resilient internet solutions for your business

More about this service
CloudswitchedBusiness Broadband & Connectivity
020 3004 3450
Insights & guides

Latest from our blog

Static IP Addresses for Business Broadband: A UK Guide to Costs, IPv4 Scarcity and IPv6 Readiness in 2026
Internet & Connectivity17 Nov 2026

Static IP Addresses for Business Broadband

A static IP address for business broadband is one of those line items that sits quietly on a connectivity quote, costs a few pounds a month, and then turns out...

Read article
Data Quality for Business Reporting - A UK Guide to Fixing Bad Data Before It Reaches Your Dashboards
Database Reporting16 Nov 2026

Data Quality for Business Reporting

Every UK business that reports from a database eventually hits the same wall: the dashboard looks polished, but nobody trusts the numbers. Data quality for...

Read article
RAG for UK Businesses - How to Build an AI Knowledge Assistant on Your Own Documents
AI15 Nov 2026

RAG for UK Businesses

Retrieval-augmented generation (RAG) is the most practical way for a UK business to build an AI knowledge assistant that answers questions from its own...

Read article
Google Consent Mode v2 and Enhanced Conversions - A UK How-To Guide for Accurate Google Ads Tracking
Google Ads & PPC14 Nov 2026

Google Consent Mode v2 and Enhanced Conversions

Google Consent Mode v2 and enhanced conversions decide whether your Google Ads account can still see what your advertising is actually doing. For a UK business...

Read article
Cyber Essentials and Unsupported Software - The UK Guide to End-of-Life Devices in 2026
Cyber Security6 Nov 2026

Cyber Essentials and Unsupported Software

If you are preparing for certification this year, the single question most likely to stop you is not about firewalls or passwords it is about Cyber Essentials...

Read article
Structured Data and Schema Markup: A UK Business Guide to Winning Rich Results in Google Search in 2026
SEO5 Nov 2026

Structured Data and Schema Markup

Schema markup is structured code added to web pages that describes their content in a standard vocabulary search engines understand: this page is a product...

Read article
Website Redesign Planning: A UK Business Guide to Avoiding the Mistakes That Tank SEO Rankings During a Rebuild in 2026
Web Development4 Nov 2026

Website Redesign Planning

Treating website redesign SEO as an afterthought is the most reliable way for a UK business to lose the organic traffic it spent years building. The pattern is...

Read article
Virtual CIO Onboarding: A UK Business Guide to What the First 90 Days Should Actually Look Like in 2026
Virtual CIO3 Nov 2026

Virtual CIO Onboarding

Good virtual CIO onboarding looks, from the outside, surprisingly unglamorous. Many UK businesses sign a virtual CIO contract expecting a strategy presentation...

Read article
Network Capacity Planning: A UK Business Guide to Forecasting Growth Before Your Network Becomes the Bottleneck in 2026
Network Admin1 Nov 2026

Network Capacity Planning

Network capacity planning is the practice of knowing how much headroom each part of your network has, forecasting when growth will use it up, and acting before...

Read article
Office Downsizing and Consolidation: A UK Business Guide to Moving to a Smaller Office Without Losing IT Capability in 2026
IT Office Moves31 Oct 2026

Office Downsizing and Consolidation

Planning office downsizing IT is a different exercise from planning a normal office move, and treating it as a smaller version of one is where most problems...

Read article
Technology stack

Built on technology you can trust.

We design, run and secure your IT on proven, industry-leading platforms, including Microsoft 365 and Azure, Cisco Meraki, Cloudflare, AWS, BitDefender and SolarWinds, so your business stays secure, scalable and reliable.

  • SolarWinds
  • Cloudflare
  • BitDefender
  • AWS
  • Hono
  • SolarWinds
  • Cloudflare
  • BitDefender
  • AWS
  • Hono
  • Opus
  • Office 365
  • Microsoft
  • Cisco Meraki
  • Microsoft Azure
  • SolarWinds
  • Opus
  • Office 365
  • Microsoft
  • Cisco Meraki
  • Microsoft Azure
  • SolarWinds

Enquiry Received!

Thank you for getting in touch. A member of our team will review your enquiry and get back to you within 24 hours.